The Method Of Repairing The Leakage Of Stainless Steel Water Tank

1, Attach another stainless steel plate to the seepage area of the stainless steel water tank: It is recommended to grind and clean the seepage area, keep the adhesive area dry, and then apply JL-109 AB stainless steel strong adhesive to the seepage area or the stainless steel plate to be attached. It can be positioned at room temperature for 3-5 minutes, reach strong compressive strength in 24 hours, and achieve super strong adhesion for cold welding after complete solidification. The key to this method is to evenly distribute the adhesive. This method is suitable for repairing large gaps and may have a certain impact on the appearance.
2, Stainless steel strong adhesive with good fluidity can be used to penetrate into the gaps and achieve the filling effect after solidification. This method of strong adhesive is prone to overflow.
3, Using JL-112 steel repair adhesive, in a paste form, mixed evenly in proportion, the adhesive needs to be forcefully pressed into the gap. After curing, it reaches the super strong bonding force of cold welding and can be mechanically reproduced for processing. It is a good repair adhesive for stainless steel water tank leakage, such as repairing stainless steel gaps, sand holes, and wear.